LIST OF MAIN COMPONENTS
7.
1.
8.
3.
4.2.
5.
6.
1.Handle
2.Bowl
3.Stirrer
4.Securing screw
5.
6.Start/stop button
7.Top
8.Lid
PREPARATION FOR USE
We check every device before it leaves the factory, but for safety’s sake you should check for damage when you have unpacked it and before using it for the first time. If it appears that the device has suffered damage, please contact the store where you bought it. Do not use it until it has been checked by a qualified electrician.
Before using the device, check that you have removed all the packaging and transport materials, inside and out.
Before using the device for the first time Clean the bowl (2), lid (8), top (7) and stirrer
(3) before use. See "Cleaning".
Placing
Place the device on a flat, stable surface such as a kitchen worktop. The lower parts do not get hot when in use and will not therefore damage the surface.
OPERATION
•Pour the desired amount of oil and maize kernels into the bowl (see portions below). Spread evenly. If you want to flavour the popcorn with butter, take
•Place the lid on the bowl. Check that the handles on each side of the bowl are aligned with those of the bowl. Do not put the top on the lid.
•Connect the plug to the mains socket and switch on the device using the on/off switch (6). The stirrer will revolve and the bowl will become hot.
•Do not shake the device while it is working! Whilst the popcorn is expanding, the lid can become steamed up. This is normal.
•The popcorn is ready when the sound of popping inside the bowl ceases, usually after
•Switch the device off at the on/off button and remove the plug from the mains.
•Caution! The bowl will become very hot during use. Do not touch the bowl before it has completely cooled down!
•Serve the popcorn direct from the lid or pour it into a serving bowl and sprinkle with salt.
-Put the top on the lid and check it is secure.
-Hold the handles of the bowl and turn
-Lift the bowl off the lid. The lid can contain hot steam. Exercise caution when lifting the bowl.
15
