Care and Cleaning (Continued)
1.Press OFF button.
2.Unplug and allow to cool completely before cleaning.
3.Wash and dry all removable parts.
CAUTION: DO NOT IMMERSE CORD, PLUG OR COFFEEMAKER UNIT IN WATER OR OTHER LIQUID.
CAUTION: BLADES ARE SHARP. HANDLE CAREFULLY.
4.Special cleaning of the coffeemaker is recommended at least once a month, depending on frequency of use and quality of water. Mineral deposits can form a coating in the coffeemaker. This may cause an off flavor in the water and may lengthen brewing time.
5.Fill the decanter with 1 cup of vinegar and add 3 cups cold water. Pour into water reservoir.
6.Make sure mill/brew basket and assembly are securely in place and lid is closed.
7.Place decanter on warming plate.
8.Press ON button.
9.Halfway through brewing, press the OFF button. Carefully remove the decanter and place on a heat resistant surface. Wait 15 minutes and pour solution back into water reservoir.
10.Press ON button. Allow all solution to empty into decanter. After dripping stops, press OFF button and discard solution.
11.Allow coffeemaker to cool 10 minutes. Rinse it out by brewing a decanter full of cold water. Discard water.
12.Wash, rinse and dry decanter and lid.
13.You may also use a commercial cleaner made for automatic coffeemakers.
14. When coffeemaker has cooled, wipe exterior housing with a damp cloth.
Any servicing requiring disassembly other than the above cleaning must be performed by an authorized service center.
Mill & Brew Assembly
Never attempt to disassemble the grinder. If you wish to empty the mill/brew basket to refill with different beans, pour beans out, then fill with new beans. There will always be some ground coffee remaining in the basket.
8
