INSTALLATION

SPLASH RESISTANT: DO NOT use this unit under direct

water flow. This unit is splash resistant, meaning it can

withstand small splashes of water.

MOUNTING THE UNIT ON

THE BASE

To use this unit with the supplied base, simply insert the base into the hole on the bottom of the unit, then rotate the base 90° to attach the base to the main unit as shown in figure 1.

Figure 1

REMOVING THE UNIT

FROM THE BASE

To remove unit from base, simply press in on the tab located at the bottom of the base and lift up the unit as shown in figure 2.

Figure 2

6

Page 7
Image 7
Memorex MC1009 manual Installation, Mounting the Unit on Base, Removing the Unit From the Base