8
OPERATION (Continued)
SETUP MENU
The Setup menu lets you customize this digital frame by allowing you to
set the effects between your photos, adjust the speed of the slideshow
and more!
Use the following instructions to navigate and change the options which
are described on the following page.
1. ConnecttheunittoanAC
power source (as shown
on page 4). In the main
menu, select Setup using
the Navigation Left/Skip
(o)1and/or Right/Skip
(n)2button; then press
the Select/Play/Pause
(®p) button 3to enter
the Setup menu.
2. Use the Navigation Up/
Rotate 4and/or Down/Brightness 5to select one of the Setup
options (i.e. “Interval Time”), then press the Select/Play/Pause (®p)
button 3or Navigation Right/Skip (n) button 2to select it; the Setup
optionwillchangeto gray from yellow.
3. Use the Navigation Up/Rotate 4and/or Down/Brightness 5to
change the desired option setting (i.e. choose between 5 Sec., 15
Sec., etc.), then press the Select/Play/Pause (®p) button 3to make
thechange.
4. Press the Navigation Left/Skip (o) button 1to go back to the
previousSetupoption. Exit by pressing the MODE/Stop (I) button 6.
(NOTE: Youcan also exit by selectingtheExitSetupMode option.)
1
3
2
6
4
5
CONTINUED ON THE NEXT PAGE