Memorex MM1920 operation manual Exit, Control System of Power Supply energy-saving

		shown time plus 5 with the unit is Second
Language		Switch-over of language is	indicated by	menu,
		including English, Chinese and other 6 languages etc
Degauss		Degauss manually
		.Use this selection to return	to the initial	factory
.Recall	RF
		setting .but limited to the mode specified in appendix
		.Exit OSD adjustment, memorize the value of the
Exit	EXIT
		current setup

Note：The vertical and horizontal moiré values in the menu are preset by factory. No adjustment otherwise dithering and interference will show ,if so, adjust the line wave and field wave till it get normal .(Both values are 0 in general conditions)

Control System of Power Supply (energy-saving)

The monitor is EPA ENERGY STAR® compliant when used with a computer equipped with VESA DPMS functionality .If your computer does not support DPMS, to achieve Energy-saving, Please install a DPMS supporting software in your computer Please consult your local dealer for detail

Following is signal standard of power supply control.

Synchronization	Stature	Mode of power supply control
Signal	Normal	Mode of energy-saving
Horizontal
	on	On/off
Synchronization
Vertical
	On	Off/on
synchronization

8