Base Unit (Side View)
Telephone Modular
Wall Jack
Studs
Wall Mount
Slots
Wall Mounting
Bracket
(Figure 4)
NOTE: If you do not have a standard modular wall jack, find a qualified technician to mount one on the wall.
B. WALL MOUNTING (No Standard Wall Jack)
1.Drill two holes with a vertical distance between the two
marked positions of 3 15/16" (100 mm) as shown in Figure 5.
2. Drive a screw into each of the holes. Tighten them to the end of the screw line, only leaving the smooth part of the screw head outside the wall.
3. Hang the unit onto the screws, and then slide it down firmly to fasten the base securely.
BASE RETAINER TAB
If the base unit is to be placed in the wall mount position, the base retainer tab allows the handset to hang onto the base unit.
Retainer Tab
(Figure 6)
BELT CLIP INSTRUCTION
Clamp the belt clip at the back of the handset as shown in Figure 7.
Belt Clip
(Figure 7)
7
