Memorex MPH7825 manual Auto Channel Scan, Manual Channel Scan

2.Press the TONE (*) button once to switch from Pulse to Tone dialing temporarily. Pulse dialing mode resumes when the call is ended.

PAUSE FUNCTION

¥In some cases, such as PABX or long distance service, a pause may be needed in the dialing sequence. Pressing the handset RE / PA button inserts a four-second delay between dialed numbers.

¥Each four-second pause occupies one digit of the available 16 digits per memory location.

FLASH FUNCTION

¥Used to access custom calling features such as Call Waiting or Three-Way Calling pro- vided by your local phone company. Consult your local phone company for more details.

CHANNEL SELECTION (40 Channels)

A.AUTO CHANNEL SCAN

¥When you place or receive a call and handset TALK button is pressed, the unit auto- scans for the best channel available.

¥Once it finds a clear channel, the base unit and handset IN USE LED indicators will light up.

B.MANUAL CHANNEL SCAN

¥If the existing channel becomes noisy or starts having interference, press the SCAN button on the handset repeatedly until a clear channel is found.

OUT OF RANGE WARNING

¥The handset and base unit communicate up to a certain maximum range. The distance can be affected by weather, power lines, or even other cordless telephones.

¥If you are far away from the base unit, the handset emits three beeps every 2 seconds to warn you that the background noise level is too high for proper communication between the handset and the base unit.

¥When you hear this sound, you should move closer to the base unit to reduce the noise

level. Otherwise, the call will automatically cut off after 28 seconds.

NOTE: Excessive static for more than 28 seconds can cause the handset to lose link with the base. Return the handset to the cradle to re-establish the security link.

LOW BATTERY WARNING

¥When the handset battery voltage level is low, the handset will beep every 8 minutes and the handset BATT LOW LED indicator will flash in talk mode.

¥In standby mode, the handset BATT LOW LED indicator will flash.

¥Return the handset on the base cradle to charge.

PAGING FUNCTION

¥Press the PAGE button on the base unit. The page tone will be heard on the handset. The handset IN-USE LED indicator will flash indicating the paging period. Page is also useful to help locate a misplaced handset.

RESETTING THE SECURITY CODE AND CHANNEL INFORMATION

Communication between the handset and base unit may not be possible in any of the fol- lowing situation:

¥After a power failure.

¥After relocating the base unit by disconnecting the adapter.

¥After replacing the handset battery.

To reset, place the handset on the charge cradle of the base unit for 5 seconds.

11