Color profile: Disabled Composite Default screen
▼Mounting Directly on a Wall
If you do not have a standard wall plate, you can mount the phone directly on a wall. Before mounting your cordless telephone, consider the following:
∙Select a location away from electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.
∙Make sure the wall material is capable of supporting the weight of the base and handset; otherwise, damage to the unit could result.
∙Use #10 screws with anchoring devices suitable for the wall material where the base will be placed.
1. Insert the screws, with their appropriate anchoring devices, 3 5/16 inches apart. Allow 3/16 of an inch between the wall and screw heads for mounting the phone.
2. Plug the AC adapter into the base.
3.Place the AC adapter cord inside the left molded channel cord holder.
4.Plug one end of the telephone cord into the TEL LINE jack on the base.
5.Place the telephone cord into the right molded channel cord holder.
6.Place the base on the screws and push down until it’s firmly seated.
7.Plug the other end of the telephone line into the telephone wall jack. (Remember, the phone must be fully charged before you can use it.)
8.Plug the AC adapter into a standard 120V AC wall outlet that is not controlled by a wall switch.
! | Use only the Memorex AC adapter that came |
with the phone. |
9. Raise the antenna on the base.
7
H:...MPH 6955 Map OM.vp
Mon Jun 28 16:00:17 1999
