Memorex mph 6955 manual Setting Up Your Phone, Using Your Phone

Color profile: Disabled

Composite Default screen

Setting Up Your Phone

Raising the Antenna

Before using your phone, be sure to raise its antenna to the vertical position.

Adjusting Ringer/Volume Controls

▼Ringer Tone and Volume

1.While the phone is not in use, press VOLUME .

2.The phone has two ringer tones, each with two volume levels. Press VOLUME again until you hear the ringer tone and volume level you want.

▼Setting the Handset Earpiece Volume

1.While you are on a call, press VOLUME .

2.The phone has three receiver volume levels, Normal, High and Loud. Press VOLUME again until you hear the volume level you want. When you hang up, the phone keeps the last volume setting selected.

Using Your Phone

Making and Receiving Calls

		Handset on Base		Handset off Base
Answer call	When the phone rings, remove the handset from the base.		Press any key.
	(AutoTalk)
	1.	Remove the handset from the base and press TALK.	1.	Pick up the handset and press TALK.
Make call	2.	The TALK LED lights.	2.	The TALK LED lights.
	3.	Listen for the dial tone.	3.	Listen for the dial tone.
	4.	Dial the number.	4.	Dial the number.
Hang up	Return handset to the base. (AutoStandby)		Press TALK.
	1.	Remove the handset from the base and press TALK.	1.	Pick up the handset and press TALK .
Redial	2. Listen for the dial tone.		2.	Listen for the dial tone.
	3.	Press REDIAL to dial the number.	3.	Press REDIAL to dial the number.

Storing a Number in Memory

Your MPH 6955 phone has 10 memory locations for storing important telephone numbers.

1. Remove the handset from the base and press MEM. The TALK LED flashes and you hear a beep.

2.Enter the phone number you want to store (up to 16 digits).

	You have 20 seconds after pressing MEM
NOTE	to enter the number you wish to store.
	Otherwise, an error tone will sound.

3.Press MEM and enter a number (0-9) on the keypad for the memory location you want to use.

You hear a long beep and the TALK LED goes out indicating the number has been stored successfully.

If you select any keys other than 0-9, the handset will beep rapidly and no number will be stored.

	You cannot store numbers in M1, M2, or
NOTE	M3. Refer to “One-Touch Dialing.”

8

H:...MPH 6955 Map OM.vp

Mon Jun 28 16:00:18 1999