Color profile: Disabled Composite Default screen
Desk or Tabletop Installation
1.Plug the AC adapter cord into the DC IN 9V input jack on the base.
2.Wrap the AC adapter cord inside the molded
3.Plug one end of the telephone cord into the TEL LINE jack on the base.
4.Place the telephone cord into the right molded channel cord holder.
5.Plug the other end of the telephone cord into the telephone wall jack. (Remember, the handset must be fully charged before you can use it.)
6.Plug the AC adapter into a standard 120V AC wall outlet that is not controlled by a wall switch.
! | Use only the Memorex AC adapter that came |
with the phone. |
7.Raise the antenna on the base.
Wall Installation
▼Setting the Handset Retainer for Wall Mounting |
2.Flip the retainer over so the tab is facing up.
3.Slide the retainer back onto the base.
▼Mounting on a Standard Wall Plate
The phone is designed to be mounted on a standard AT&T or GTE wall plate.
1.Plug the AC adapter into the DC IN 9V input jack on the base.
2.Place the AC adapter cord inside the left molded channel cord holder.
3.Plug a telephone cord into the TEL LINE jack on the base.
4.Place the telephone cord into the right molded channel cord holder and plug the other end of the cord into the wall jack. (Remember, the phone must be fully charged before you can use it.)
5.Place the base on the two posts of the wall plate and slide downward to secure.
6.Plug the AC adapter into a standard 120V AC wall outlet that is not controlled by a wall switch.
1. Remove the handset |
retainer on the base by |
sliding it upward. |
!
Use only the Memorex AC adapter that came with the phone.
6
7. Raise the antenna on the base.
H:...MPH 6955 Map OM.vp Mon Jun 28 16:00:15 1999
