Installing and configuring the eyeBeam SIP softphone __________

Use this procedure to install the eyeBeam softphone on your PC and configure it for use with TeleVantage.

Notes

QThese procedures describe the eyeBeam audio-only softphone version 1.1 3004w or higher. It is recommended that you have the eyeBeam User's Manual available as you install the softphone.

QThe configuration procedure describes only those steps necessary for the eyeBeam phone to work with TeleVantage. Other settings may be left in their default configuration. For information on using other eyeBeam features, see the eyeBeam documentation.

To install and configure an eyeBeam softphone

1.Install the softphone on the PC that will be using it.

2.Start the softphone. When prompted, enter the license key that you were supplied, and click OK.

3.In the Audio Tuning Wizard, configure the phone with the desired audio settings. See the eyeBeam documentation for how to set audio settings.

G-4

USING TELEVANTAGE

Page 354
Image 354
Vertical Communications TeleVantage 7.5 manual Installing and configuring the eyeBeam SIP softphone