Vertical Communications TeleVantage 7.5 manual Conferencing, Hold

eyeBeam	Pocket PC Feature	Directions
softphone	softphone







Auto	Click the eyeBeam phone’s AC button to enable
Conferencing	or disable Auto-Conference. Combined with
	Auto-Answer, these two features control how
	participants are added to a conference, as
	follows:
	AA off / AC off - Manual conference. The
	conference host manually accepts calls and
	adds them each to the conference.
	AA on / AC off - Auto-answer, manual add to
	conference. eyeBeam automatically answers
	calls and the conference host manually adds
	each to the conference.
	AA off / AC on - Individual answer, auto add to
	conference. The conference host answers each
	call and each is automatically added to the
	conference.
	AA on / AC on - Conference Server Mode.
	eyeBeam acts as a fully automated conference
	server, automatically answering each incoming
	call and adding them to the conference.
Conferencing	Click the phone’s CONF button to create a
	3-way conference call when calls exist on
	multiple lines. (The user must have multiple line
	appearances enabled by the system
	administrator.) See the eyeBeam 1.1 User
	Guide about create 3-way conference calls with
	additional features enable such as Auto Answer
	and Auto-Conferencing. See also “Creating
	conference calls” on page 12-12.
Hold	Click either the phone’s Hold button or an active
	Line button to put a caller on hold.
	Phone-activated hold is silent and does not play
	the TeleVantage telephone commands.
	Note: If a call on hold exceeds the hold ringback
	time, the ringback call is placed on a different
	line. You can either follow the ringback call
	prompts to connect to the call on hold, or hang
	up the ringback call and retrieve the call on hold
	yourself.

APPENDIX G. USING THE COUNTERPATH SIP SOFTPHONES G-9