Vertical Communications TeleVantage 7.5 manual Quick call commands

Quick call commands_____________________________________

Pressing * at a dial tone gives you quick access to the commands listed in the following table Some or all of these commands may be unavailable to you if your system administrator has not granted you permission.

Quick call commands

	Hear your phone’s station ID, extension and other
*0	information. Pressing *00 logs you out from a station
	you have been using as a visitor, and returns the station
	to its default user.
*10	Enable and disable hands-free answering. See “Using
	hands-free answering” on page 4-4.
*11	Enter an account code for the current call or the call you
	are about to dial.
*12	Enable and disable voice-first answering. See
	“Receiving internal intercom calls with voice-first
	answering” on page 4-5.
*14	Call as a queue. See the next table for details.
	Place a page or an intercom call. To place a page
*15	(1-way audio to multiple users), dial *15 plus a
	workgroup’s extension. To place an intercom call
	(2-way audio), dial *15 plus a user’s extension. See
	“Placing a page or intercom call” on page 3-6.

	Start and stop recording a call. You can press *16 at the
*16	dial tone, then dial the call. You can also press
	Flash *16 at any point during the call to start or stop
	recording.
	Associate a trunk with an external station, so that
*17	subsequent placed calls are treated as originating from
	the station. This command is valid only after logging on
	to an account that has an assigned external station.
	Test the Internet connection between a VoIP
	TeleVantage station and the TeleVantage Server. After
*18	pressing *18 from the VoIP station, the system echoes
	back anything you say, enabling you to judge delay. To
	end the test, press # or hang up. This command is
	available only from VoIP stations.

APPENDIX A. TELEPHONE COMMANDS QUICK REFERENCE A-3