Vertical Communications TeleVantage 7.5 manual Specifying options for a remote number

If you forget your own station ID, you can enter 0 for the Station ID, click OK, then in the next window select Use your default station.

QRemote number. To use ViewPoint in conjunction with a phone that is not a TeleVantage station, select this field and enter the phone number or IP address of the phone. As long as this ViewPoint session lasts, that phone will be the associated phone.

Click to choose advanced options for the number (see the next section, “Specifying options for a remote number” ).

QeyeBeam SIP softphone. This is the preferred softphone option for the highest audio quality. See Appendix G, “Using the CounterPath SIP softphones.”

QTeleVantage H.323 softphone. This option does not provide as high audio quality as the SIP softphone. See Appendix F, “Using the TeleVantage H.323 SoftPhone.”

QNone. Choose this option to use ViewPoint without an associated phone. ViewPoint commands that require a phone—for example, placing a call—will be unavailable.

3.In Server, type the network name of a TeleVantage Server computer on your network,

or click to select one.

4.Click OK.

Specifying options for a remote number

If you selected Remote number, you can click to open the Check Phone Number dialog box, where you can specify how TeleVantage dials the number.

1.Under Address type, make sure the correct type of number is selected.

2.Under Call Using, either accept the default dialing service access code for the type of number selected, or click This access code and enter a different access code. Your system administrator can tell you what access codes are available.

3.Under Country/Region, make sure that the correct country is selected.

CHAPTER 8. USING TELEVANTAGE VIEWPOINT 8-5