Vertical Communications TeleVantage 7.5 manual Checking a number, Entering an IP address

Entering an IP address

If you selected an H.323 or SIP Internet dialing service in the Call Using field, use the Address field to enter one of the following:

QFor an H.323 Internet address, enter the IP address of the remote H.323 device or TeleVantage Server to which you want to connect. For example, 123.45.67.89 or abccorp.com.

QFor a SIP Internet address, enter the SIP URI of the party you want to call. For example, sip:vwilliams@abccorp.com.

If the IP address connects you to an external H.323 Gateway, you can dial a phone number through it by appending the phone number to the IP address. Separate the address from the phone number with a slash character, for example, 123.45.67.89/6173540600.

If the IP address connects you to a remote TeleVantage Server, you can append a user’s Direct Inward Dial (DID) number in the same manner, for example, 123.45.67.89/2717. You cannot append a user’s extension.

Checking a number

To confirm that TeleVantage has correctly interpreted a number or address that you have entered—for example, that it has recognized the correct country on an international call—click next to the Number or Address field. The Check Phone Number dialog box opens. You can correct any dialing errors here before you place the call.

Note: The dialog will open automatically if the number you entered was unclear.

To check a phone number

1.Under Country/Region, make sure the correct country is selected.

2.Under City/Area code and Local number, confirm that TeleVantage has interpreted the number correctly.

CHAPTER 12. PLACING CALLS IN VIEWPOINT 12-9