Vertical Communications TeleVantage 7.5 manual Appendix G. Using the Counterpath SIP Softphones

4.Next, the Settings dialog box opens. Choose the SIP Accounts \ Add a New SIP Account \ Server tab.

Note: If you accidentally exit the dialog box, right-click anywhere on the eyeBeam phone and choose Settings to open it again.

5.Check Enable this SIP account. This enables the eyeBeam phone to register with TeleVantage.

6.Under User details, enter the following information:

Q Display name. Enter your name as you want it displayed to callers.

QUser name. Enter one of the following:

QIf you have an external station. Enter a name that matches the Userinfo field in your external station configuration as shown in Tools > Options, Phone \ Station Features tab. (See “Configuring a SIP phone” on page 6-14.)

QIf you don’t have an external station. Enter a name that matches the Userinfo of SIP URI field of the SIP account that you want to use with the phone, as shown in Tools > Options, Personal \ SIP Account tab. (See “Customizing SIP accounts” on page 18-19.)

QPassword/Authentication user name. Enter the authentication credentials your system administrator provided (or leave blank if not required by your system).

QDomain. Enter the name or IP address of the TeleVantage SIP Span to which this phone is registered, as provided by your administrator.

7.Under Domain Proxy, check both Register with domain and Use as outbound proxy.

APPENDIX G. USING THE COUNTERPATH SIP SOFTPHONES G-5