CONNECTION USING A COMPONENT CABLE:
Follow the instructions below to connect an external unit, such as a VCR or a DVD player, to your unit using the Y, Pb, Pr jacks. (CABLES NOT INCLUDED.)
VCR or DVD player
VCR/DVD
INCOMING CATV
CABLE (VCR)
AUDIO/VIDEO Cord
1.Connect the cable, satellite or incoming antenna to the VHF/UHF IN jack on the rear of the VCR or DVD player.
2.Connect the left and right audio cable from the DVD/ VCR’sAudio OUT jacks to the TV’s left and right AUDIO 1 IN jacks.
3.Connect the component cables (not included) from the DVD's Y, Pb/Cb, Pr/Cr OUT jacks to the TV’s Component IN (Y, Cr, Cb) jacks.
4.Press the INPUT button until component appears on the TV screen.
CONNECTION USING S-VIDEO CABLE:
Follow the instructions below to connect an
VCR/DVD
INCOMING CATV
CABLE (VCR)
From VCR OUT jacks
AUDIO Cord
To |
1.For VCR, connect the cable, satellite or incoming antenna to the ANT jack on the rear of the VCR.
2.Connect the left and right audio cable from the DVD/ VCR’s Audio OUT jacks to the TV’s left and right AUDIO 1 IN jacks.
3.Connect the DVD/VCR’s
4.Press the INPUT button until
NOTE: If the
11