9
CONNECTION

CONNECTING THE DVD TO A TV USING THE AUDIO/VIDEO OUTPUT JACKS

AUDIO
OUT VIDEO
OUT
1L
2COAXIAL
DIGITAL OUT S-VIDEO
OUT OPTICAL
OUT
PROGRESSIVE SCAN
ON OFF
PR
PB
Y
Audio Cable (Included)
Video Cable (Included)
From 
Video Out
From 
Audio 
Out
To
Audio In To
Video In

CONNECTING THE DVD TO A TV USING THE S-VIDEO OUTPUT JACK

Audio Cable (Included)
S-Video Cable (Not Included)
From
S-Video
Out
From
Audio
Out
To
Audio In To S-Video In
NOTES FOR CONNECTING TO ATV:
• If your TV has an S-Video input, connect the DVD player with the S-Video cable for best results.
• When connecting the DVD, refer to the owner’s manual of the TV, as well as this manual.
• When connecting the DVD to the TV, make sure the power is off and both units are unplugged before making any connections.
• If your TV only has one audio input, the use of a “Y” connector may be necessary. Visit your local electronics supply store.
• Connect the DVD player to your TV directly. If you connect the DVD player through a VCR, the playback picture will be
distorted because DVD video discs are copy protected.
• Set the VIDEO OUT Option (on the GENERAL MENU Page) to CVBS if using S-Video.
• After connecting, press the AUDIO MODE button to the desired audio setting.