DVD BASIC OPERATION
IMPORTANT NOTES:
•When turning the unit on for the first time, press the POWER button on the main unit (not the remote control) to the ON (in) position. You can then use the remote control to turn the unit off and on, as long as you do not press the POWER button on the main unit to the OFF (out) position. When the unit is in the Standby mode, the STANDBY indicator will light.
•“
” will appear on the TV screen during operation if you try to access a function that is not available on the disc.
•Some discs may take a few seconds to load.
•If a disc is inserted incorrectly, dirty, damaged or not present at all, “NO DISC” will appear in the display.
•Always hold the disc without touching either of its surfaces. When inserting a disc, position it with the printed title side facing up, align it with the guides and place it in its proper position.
•It is important that you read the manual that accompanies the DVD disc as there are features that are on this DVD player that cannot be used with certain DVDs. There are also extra features on the DVD disc that are different for each DVD disc, so they are not explained in this owner’s manual.
PLAYBACK OF A DVD
1
| PBC | POWER/ | OPEN/ |
| STANDBY | CLOSE | |
SUBTITLE | TITLE | AUDIO | DVD |
MENU | MENU | MENU | MENU |
1 | 2 | 3 | 3D |
4 | 5 | 6 | ANGLE |
|
|
| AUDIO |
7 | 8 | 9 | MODE |
| 0 | CLEAR | ZOOM |
DISPLAY |
|
| SETUP |
RETURN |
|
| ENTER |
SLOW/R |
|
| SLOW/F |
2
| PBC | POWER/ | OPEN/ |
|
|
| STANDBY | CLOSE |
|
| |
SUBTITLE | TITLE | AUDIO | DVD |
|
|
MENU | MENU | MENU | MENU |
|
|
1 | 2 | 3 | 3D |
|
|
4 | 5 | 6 | ANGLE |
|
|
|
|
| AUDIO |
|
|
7 | 8 | 9 | MODE |
|
|
| 0 | CLEAR | ZOOM |
|
|
DISPLAY |
|
| SETUP |
|
|
|
|
| PROG | TITLE | CHAPTER |
RETURN |
|
| ENTER |
|
|
SLOW/R |
|
| SLOW/F |
|
|
Press the POWER button to turn on the unit. If turned on with the remote control, the STANDBY indicator will go out. See important note regarding STANDBY above.
3 | MENUTITLEPBC | POWER/ | OPEN/ |
| |
SUBTITLEMENU | 1 | ||||
STANDBYAUDIOMENU | CLOSEMENUDVD | ||||
1 | 2 | 3 | 3D |
| |
4 | 5 | 6 | ANGLE |
| |
7 | 8 | 9 | AUDIOMODE |
| |
DISPLAY | 0 | CLEAR | SETUPZOOM |
| |
RETURNSLOW/R2 |
|
| SLOW/FENTER | TER | |
|
| 3 |
Press the OPEN/CLOSE button to open the disc tray, “OPEN” will appear on the screen and in the display. Insert a disc will the label side facing up on the disc tray.
| 4 | 5 | 6 | ANGLE | |
4 | 7 | 8 | 9 | AUDIOMODE | |
DISPLAY | 0 | CLEAR | SETUPZOOM | ||
| |||||
| RETURNSLOW/R |
|
| SLOW/FENTER | |
| 2SEARCHPROGRAMRANDOMPAUSE/STEP1 | ||||
| MUTE | REPEAT |
| ||
Press the OPEN/CLOSE button ❶ to close the disc tray. “CLOSE” will appear on the screen and in the display. After loading, “DVD” will appear in the display and the menu screen of the DVD should appear. Use the Navigation (➛,❿, ,❷) buttons ❷ to select the desired option and ENTER button ❸ to select it.
If the password is set and the inserted disc is within the Parental Ratings set, then the Password screen will appear, prompting you to enter the password.
To stop playback, press the Stop (■) button ❶; “PRESS PLAY KEY TO CONTINUE” will appear on the TV screen. Because the unit will remember where you stopped, simply press the Play (❿) button ❷ to resume playback where you left off (resuming playback).
If the Stop (■) button ❶ is pressed twice, the TV screen shows “STOP” and the unit will stop completely.
NOTES:
• If a MENU appears on the TV screen, press the Navigation (➛,❿, ,❷) buttons to select the desired option/item, then press the ENTER button. Please make sure to refer to the disc’s jacket or case of the disc for additional information.
•Resuming playback may not work on all discs.
21
