9
CONNECTION

CONNECTING THE DVD TO A TV USING THE AUDIO/VIDEO OUTPUT JACKS

Audio Cable (Included)
Video Cable (Included)
To
Audio In To
Video In

CONNECTING THE DVD TO A TV USING THE S-VIDEO OUTPUT JACK

Audio Cable (Included)
To
Audio In
S-Video Cable 
(Not Included)
From 
S-Video 
Out
To S-Video In
NOTES FOR CONNECTING TO ATV:
•If your TV has an S-Video input, connect the DVD player with the S-Video cable for best results.
•When connecting the DVD, refer to the owner’s manual of the TV, as well as this manual.
•When connecting the DVD to the TV, make sure the power is off and both units are unplugged before making any connections.
•If your TV only has one audio input, the use of a “Y” connector may be necessary. Visit your local electronics supply store.
•Connect the DVD player to your TV directly. If you connect the DVD player through a VCR, the playback picture will be
distorted because DVD video discs are copy protected.
•Set the VIDEO OUT Option (on the GENERAL MENU Page) to S-VIDEO if using S-Video.
•After connecting, press the AUDIO MODE button to the desired audio setting.