CONNECTION (CONTINUED)

CONNECTING THE DVD TO A TV USING THE Y/PB/PR JACKS

To

Component

Video In

Y

PB

PR

To

Audio In

Audio Cable (Included)

Component Cable

 

(Not Included)

From

Audio

Out

From

Component

Video Out

NOTES FOR CONNECTING TO A TV:

TV must have Y, PB and PR input jacks.

Set the TV’s TV/VIDEO button or switch to the VIDEO setting.

Set the VIDEO OUT Option (on the GENERAL Menu Page) to YUV if using the component Video Out jacks.

When connecting the DVD, refer to the owner’s manual of the TV, as well as this manual.

When connecting the DVD to the TV, make sure the power is off and both units are unplugged before making any connections.

Connect the DVD player to your TV directly. If you connect the DVD player through a VCR, the playback picture will be distorted because DVD video discs are copy protected.

If using a TV with a blue screen option, turn the option off, on the TV for best results.

PROGRESSIVE (Y, PB, PR) VIDEO OUT:

Use these jacks to connect to a TV with progressive video input jacks, set the PROGRESSIVE SCAN switch to ON. Progressive scan is a video scanning system that displays all lines in a frame in one pass, as opposed to the traditional system, interlaced scan. This connection provides optimum quality. To ensure maximum picture quality, use three video- grade cables for connections. Note that it is essential to match the color-coded connectors with a compatible TV.

525 LINE DIGITAL PROGRESSIVE-SCAN COMPONENT VIDEO OUTPUT

Compared to standard interlaced video, progressive scan effectively doubles the amount of video information fed to your TV or monitor. The result is a stable, flicker-free image. (Check your TV/monitor for compatibility with this feature.)

For the very highest picture quality, try watching a movie on DVD-Video on a progressive-scan compatible TV.

NOTES:

If you connect a TV that is not compatible with a progressive scan signal and set the PROGRESSIVE SCAN switch is in the ON position, you will not be able to see any picture at all. To regain the picture, you must shut the unit off and set the PROGRESSIVE SCAN switch to the OFF position. Then, turn the unit on and the picture will appear.

CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SET THE PROGRESSIVE SCAN SWITCH TO “OFF”.

10

Page 11
Image 11
Memorex MVD2037 manual Connecting the DVD to a TV Using the Y/PB/PR Jacks, Progressive Y, PB, PR Video OUT