INSTALLING THE REMOTE CONTROL’S BATTERY
Replacing the Remote Batteries
1. Remove the battery cover by pressing in on the tab and the lifting the cover off.
2. Insert a CR2025
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer’s directions.)
CONNECTIONS (CONTINUED) |
| |
(VERY GOOD) | ||
the rear of the DVD player. Connect the other end to the | COMPONENT VIDEO OUT | |
Y | PR | |
(BETTER) PROGRESSIVE (Y, PB, PR) VIDEO OUT: |
|
|
Use these jacks to connect to a TV with progressive video |
|
|
input jacks, press the HDMI/PS button to select the | PB |
|
compatible resolution of the TV. Progressive scan is a |
|
|
video scanning system that displays all lines in a frame in |
| Component Video Cables |
one pass, as opposed to the traditional system, interlaced |
|
|
scan. This connection provides optimum quality. To ensure maximum picture quality, use three
NOTE: IF THE TV SCREEN IS BLANK, PRESS THE HDMI/PS BUTTON REPEATEDLY UNTIL THE PICTURE APPEARS ON THE SCREEN AGAIN.
(BEST) HDMI (not shown): Connect an HDMI cable (Not included) to the HDMI jack on the rear of the DVD player. Connect the other end to the HDMI IN jack on the TV. HDMI transfers
BASIC PLAYBACK OPTIONS
DVD/CD/VCD BASIC OPERATION
1. Plug the power cord into the outlet once the DVD player is connected to your TV.
2. Turn on the TV and tune to its Video Input Channel, if necessary.
3. Press the STANDBY button on the remote or the PLAY /Power On button on the main unit to turn on the unit; the On/Standby indicator will® turn off.
4. Press the OPEN/CLOSE button to open the disc tray. Insert a disc with the label side
facing up on the disc tray. Press the OPEN/CLOSE button again to close the tray; playback will start automatically.
5. If the Menu appears, use the Navigation ( , , , ) buttons to select the desired option and press the ENTER/PLAY button√ ®to selectπ † it.
6. To stop playback, press the STOP ( )®button. Because the unit will remember where you stopped (not applicable in CD mode),■ simply press the ENTER/PLAY button to resume playback where you left off (resuming playback). If the STOP (®) button is pressed twice, the unit will stop completely. If the player is left in Stop/Pause■ mode for more than one minute without any user interaction, the screen saver will activate if the
ADVANCED PLAYBACK OPTIONS (CONTINUED)
PLAYBACK CONTROL (PBC): The Playback Control feature is available only on Video CDs. Press the PBC button to turn the PBC feature on and off. The
MUTE: To temporarily mute the playback sound, press the MUTE button.
SUBTITLE MENU: Press the SUBTITLE menu button to select a subtitle language and the turn the subtitle menu on/off if your subtitle feature is available on the disc.
TITLE MENU: To display the title menu if available on the disc press the TITLE menu button. Then use the Navigation ( , , , ) buttons to select your desired option and press ENTER/PLAY ® button. √ ® π †
DISPLAY BUTTON:Each press of the DISPLAY button will display the elapsed time and remaining time of a playing disc. Each press of the DISPLAY button will cycle through, depending on the playback mode as follows:
FRONT
LOCATION OF CONTROLS
audio and video signals, so if using HDMI, there is no need to connect to audio separately. IMPORTANT HDMI NOTE: When using HDMI as your video source, setup the HDMI in the General Setup Menu as described later in this manual. If your TV doesn’t have Audio and Video input jacks and only has an RF jack, you need to connect an FR modulator (not provided).
Screen Saver menu option is set to ON. There is no resume function when playing CDs.
SEARCH: During playback, press the Search or button to move the disc forward or backward at double (x2) speed to locate®®a specific√√section. Repeatedly press
1st press | DVD | CD/VCD |
Title Elapsed Time | Single Elapsed Time |
1 | 2 | 3 | 4 | 5 | 6 7 | 8 | 9 |
1. | Disc Compartment | 6. | ON/STANDBY Indicator |
2. | Remote Sensor | 7. | PLAY ®/Power On Button |
3. | Display | 8. | Memory Stick Pro/SD/Memory Stick/MMC |
4. | OPEN/CLOSE Button | 9. | Slot |
5. | Stop/Standby Button | USB Jack | |
REAR | 7 |
| |
1 | 2 | 3 | 4 | 5 | 6 |
| 4. Coaxial Digital Audio Output Jack |
1. AC Power Cord |
|
|
|
|
|
| |
2. HDMI Jack |
|
|
|
|
|
| 5. |
3. Component Video (Y, PB, PR) Output |
| 6. Audio left/Right Output Jacks | |||||
Jacks |
|
|
|
|
|
| 7. Video Output Jack |
AV Cable Part No. |
| 1. | CLEAR Button | ||||
REMOTE |
|
|
|
|
| ||
|
|
|
|
| 2. | STANDBY ON/OFF Button | |
|
|
|
|
|
| 3. | Number Buttons |
1 |
|
| 16 |
|
| 4. | SEARCH (M) Button |
2 |
|
| 17 |
|
| 5. | OPEN/CLOSE Button |
|
|
|
|
|
| 6. | Navigation (π) Button |
|
|
|
|
|
| 7. | ANGLE Button |
3 |
|
|
|
|
| 8. | ENTER/PLAY ® Button |
|
|
| 18 |
|
| 9. | Navigation (√)/SKIP (o) Button |
|
|
| 19 |
|
| 10. Navigation (†) Button | |
6 |
|
|
|
|
| 11. SEARCH Button | |
|
| 20 |
|
| 12. TITLE/RETURN Button | ||
4 |
|
|
|
|
|
| |
5 |
|
| 21 |
|
| 13. SUBTITLE Button | |
7 |
|
| 22 |
|
| ||
8 |
|
|
|
|
| 14. HDMI/PS Button | |
9 |
|
| 23 |
|
| 15. REPEAT Button | |
10 |
|
|
|
|
| 16. DISPLAY Button | |
11 |
|
| 24 |
|
| 17. MUTE Button | |
12 |
|
| 25 |
|
| 18. PBC Button | |
13 |
|
| 26 |
|
| 19. PAUSE/STEP Button | |
14 |
|
| 27 |
|
| 20. SEARCH (l) Button | |
15 |
|
| 28 |
|
| 21. STOP (■) Button | |
|
|
|
|
|
| 22. ZOOM Button | |
|
|
|
|
|
| 23. Navigation (®)/SKIP (n) Button | |
|
|
|
|
|
| 24. SETUP Button | |
REMOTE PART NO. |
|
| 25. AUDIO Button | ||||
|
| 26. DVD Menu Button | |||||
*Consumer Replaceable Part |
|
|
|
|
| 27. SELECT Button | |
(See end of manual to order.) |
|
|
|
|
| 28. Repeat | |
Connecting the DVD to a Home Theater System
1. Front Left Speaker
2. Television
3. Center
4.
5. Front Right Speaker
6. Viewing/Listening
7. Rear Left Speaker
8. Rear Right Speaker
9. AV Amplifier w/Dolby Digital Decoder/DTS Decoder
Place the subwoofer, front, rear and center speakers in locations as shown/described here. After correctly positioning the speakers, perform the Tone Test on the AV Amplifier and adjust the volume controls until the desired sound is achieved. For best results, sit in the viewing position and have someone adjust the volumes for you; this will enable you to set the optimal levels.
NOTES FOR CONNECTING TO A TV:
• If your TV has an HDMI input, connect the DVD player with the component cable for best results, otherwise use the Component,
• Set the TV’s TV/VIDEO button or switch to the VIDEO setting.
• When connecting the DVD, refer to the owner’s manuals for the TV and the audio system, as well as this manual.
• When connecting, make sure the power is off and all units are unplugged before making any connections.
• Connect the DVD player to your TV directly. If you connect the DVD player through a VCR, the playback picture will be distorted because DVD video discs are copy protected.
• If using a TV with a blue screen option, turn the option off, on the TV for best results.
• If you place the DVD player near a tuner, the radio broadcast sound might be distorted. In this case, move the DVD player away from the tuner.
and the speed will increase to x4, x8, x16 and resume normal playback.
The disc will move forward or backward at high speed until you press the ENTER/PLAY
button; normal playback will resume at that point.® PAUSE AND STEP: Press the PAUSE/STEP button while in the Play mode to pause the picture. To advance one frame at a time, press the PAUSE/STEP button repeatedly. To resume normal playback, press the ENTER/PLAY ® button.
SKIP: Press the Skip ( ) button to advance the disc to the beginning of the next chapter/track. Press the Skipn (M) button to move the disc to the beginning of the previous chapter/track.
ZOOM: Press the ZOOM button once during Normal or Still playback modes, and the unit will zoom x2. Press once or twice more and the unit will zoom x3/x4. Use the Navigation ( , , , ) buttons to move the image on the TV screen. Press the ZOOM button once more√ ®toπcancel† the zoom function. This is not available on all discs.
SLOW FORWARD AND REVERSE: Press the PAUSE/STEP button to pause the
playback, then repeatedly press the Search button to move the DVD forward in slow motion speeds of 1/2, 1/4, 1/8, 1/16 and resume®® normal playback. Repeatedly press the
Search button to move the DVD backward in slow motion speeds of 1/2, 1/4, 1/8, 1/16 and√√resume normal playback. The sound will be muted. Press the ENTER/PLAY
button to resume normal playback.® TITLE/CHAPTER SEARCH (DVD ONLY): Press the SEARCH button once. Press the Navigation ( , ) buttons to select the Title (“TT”), then use the Number buttons to select the desired title√ ®number (i.e. for number 5,press “0”, “5”). Playback will start immediately.
OR
Press the Navigation ( , ) buttons to select the Chapter (“CH”), then use the Number buttons to select the desired√ ® chapter number (i.e. for number 2, press “0”, “2”). Playback will start immediately.
TITLE/CHAPTER/TIME SEARCH (DVD ONLY): Press the SEARCH button twice. Press the Navigation ( , ) buttons to select the Title (“TT”), then use the Number buttons to select the desired√ ®title number (i.e. for number 5, press “0”, “5”). Playback will start immediately. OR
Press the Navigation ( , ) buttons to select the Title Time (“T”), then use the Number buttons to select the √desired® Title Time (Hour/Minutes/Seconds); playback will start immediately. Press the SEARCH button a third time. Press the Navigation ( , ) buttons to select the Chapter (“CH”), then use the Number buttons to select the desired√ ® chapter number (i.e. for number 5, press “0”, “5”). Playback will start immediately. OR
Press the Navigation ( , ) buttons to select the Chapter Time (“T”), then use the Number buttons to select√ the® desired Chapter Time (Hour/Minutes/Seconds); playback will start immediately.
Note: Press the Clear button to clear any incorrectly input number.
PLAYBACK MODES
Repeat Playback
While the disc is playing, press REPEAT button repeatedly to select a play mode: DVD play modes: Chapter repeat, Title repeat, off
2nd press | Title Remaining Time | Single Remaining Time |
3rd press | Chapter Elapsed Time | Total Elapsed Time |
4th press | Chapter Remaining Time | Total Remaining Time |
5th press | Off | Off |
MP3: Press the DISPLAY button to select between the Track Elapsed Time and Track | ||
Remaining Time. |
|
|
NOTE: For VCD, if the PBC is on, the Total Elapsed Time and Total Remaining Time will not be | ||
available. |
|
|
PLAYBACK OF AN MP3
PLAYING MP3 | |
MP3 is an audio file format which compresses recorded music. The main advantage of the mp3 | |
format is the ability to store CD - quality music tracks on a personal computer in a user - | |
friendly, compressed files. | |
Before inserting a disc, check that it is compatible with the player: | |
1. | Turn on the DVD by pressing the STANDBY ON/OFF button and open the disc tray by |
2. | pressing the OPEN/CLOSE button. |
Place the disc in the tray with the printed side facing up and close the tray. | |
3. | Select a folder using the Navigation (π, †) buttons, then press the ENTER/PLAY ® button |
4. | to see the folder’s contents. |
Select a track using the Navigation (π, †) buttons, then press the ENTER/ PLAY ® button | |
5. | to start playback. |
Press the STOP (■) button to stop playback. | |
6. | To go back to the folder list, press the Navigation (√) button in stop mode. |
7. | For Skip and Search functions, please refer to the basic playback options. |
8. | Enter the track/file using the number buttons to directly select or playback a file. |
PICTURE CD
Insert a CD with picture files on it.
Note: The time taken for the contents of the disc to be displayed varies according to the memory size and number of pictures actually on the disc. If nothing is displayed after a few minutes, it is likely that certain files are too large. In this case, reduce the files resolution to less than 5 megapixels and try again.
Picture CD Basic Operation
• Press the STANDBY ON/OFF button to turn on the unit; the STANDBY indicator will go out.
• If using CD, press the OPEN/CLOSE button to open the disc tray, “OPEN” will appear on the screen. Insert a picture disc with the label side facing up on the disc tray. Press the OPEN/CLOSE button to close the disc tray. “LOADING” will appear on the TV screen. After loading, playback will start automatically.
• Press the SELECT button to cycle between the Disc compartment, USB jack & Memory Stick Pro/SD, Memory Stick/MMC card jack.
• Press the Skip ( ) or ( ) button to skip through the pictures. The unit will playback all the pictures on then discMthen the menu will appear on the TV screen. Press the Navigation ( , , , ) buttons to select the desired picture and press the ENTER/PLAπY †button√ ® to playback the desired picture again. If the screen saver option is set to on, the®screen saver will turn on in about one minute when the menu appears on the TV screen.
To select a photo during playback: press the Number buttons corresponding to the picture that you would like to view (i.e. for the first picture on the disc, enter “0”,
“0”, “1”).
Connection DVD to TV
CONNECTIONS
Compatible Discs
PLAYING DISCS
CD play modes: Track repeat, All track repeat, off
VCD Mode (PBC control must be off): Track repeat, All track repeat, off
MP3 Mode: Track repeat, folder repeat, folder
To pause the photo slideshow: press the PAUSE/STEP button.
To resume playback: press the ENTER/PLAY button.
To stop playback of the picture CD: press the®STOP (■) button.
VIDEO L AUDIO R INPUT | TV |
White | Red |
White |
|
Yellowow | DVD Player |
| |
| DV D Pla yer |
NOTE: When connecting the system cables, turn off the power and make certain the AC cord has been removed from the wall outlet. See figure in previous column.
ThisDVD+/DVD- RW,playerAudiois CDs,capableVideoof playingCDs, CD/CDthe
KODAK PICTURE CD
You can’t play the following types of discs: laser Discs,
NOTE: Some discs may note be compatible due to laser pickup, recording formats and
A-B Repeat
While in the Playback mode, press the Repeat
Press the Repeat
ADVANCED PLAYBACK OPTIONS
ANGLE MARK: While in the Playback mode, press the ANGLE button; the total number of angles will appear on the screen. Repeatedly press the ANGLE button to select the desired angle; the angle will change in one to two seconds.
This is not available on all discs.
USING THE USB/CARD SLOTS
Insert the desired media, 64MB to 2GB (Memory Stick Pro/SD, Memory Stick/MMC or a portable external USB hard drive). You can play videos in WMV & MPEG4 formats, music in mp3 format or pictures in JPEG format.
Note: The time taken for the contents of the desired media to be displayed varies according to the memory size and number of pictures actually on the media.
Basic Operation
• Press the STANDBY ON/OFF button to turn on the unit; the STANDBY indicator will go out.
• Press the SELECT button to cycle between the Disc compartment, USB jack & Memory Stick Pro/SD, Memory Stick/MMC card jack.
• The playback function is the same as the DVD/CD/VCD, MP3, Photo playback. Please
1.Connect the Left and Right audio cables to the Left and Right AUDIO OUT jacks on the rear of the DVD player. Connect the other ends to the Left and Right IN jacks on the TV.
You can also use the Coaxial Digital Out as described in the next column.
2.Connect the video cable (Select one of the following connections for video.)
(GOOD) BASIC: Connect the video cable to the VIDEO OUT jack on the rear of the DVD player. Connect the other end to the VIDEO IN jack on the TV.
software used. Some technologies and methods used for MP3 file recording on CD- R/RWs can prevent optimal playback of these files by degrading the sound quality and/or the ability for the player to read the file.
Regional Coding
Both the DVD Player and the discs are coded by region. These regional codes must match in order for the disc to play. This player’s code is Region 1.
2
AUDIO (DVD AND VCD): Some discs have several audio tracks used for different languages or different audio formats. To change the language or audio format during play, press the AUDIO button one or more times to select one of the available audio formats or languages. For VCD select
Note: This option is only available if the disc offers a number of languages or formats.
refer to previous sections.
3
