Memorex MX3710 manual Setting the Timer, Snooze, Activating the Sleep Function

MX3710.O/M.QXD 4/30/02 10:49 AM Page 15

OPERATING INSTRUCTIONS (CONTINUED)

SETTING THE TIMER

Set the timer to turn the unit on to the Tuner or CD mode at a preset time as follows :

1

1

2

2
1	3

3

With the power off, press and hold the TIMER/SLEEP button ❶ until “TIMER” blinks in the display. Press and hold the MEMORY/TIME SET button ❷ until timer hour digits blink in the display.

Press the TUNING/CD SKIP/ SEARCH ( ) ❶ or ( ) ❷ button to set the hour, then press the MEMORY/TIME SET button

❸again; the minute digits will blink. Press the TUNING/CD SKIP/SEARCH ( ) ❶ or ( ) ❷ button to set the minutes, then press the MEMORY/TIME SET button ❸ again.

Within a couple seconds, “TIMER” will light in the display to indicate that the timer is set. When the actual time matches the time set for the Timer, the unit will turn on to the last function (CD or tuner) used.

TO TURN THE TIMER OFF SO IT IS NOT SET FOR THE NEXT DAY, press the TIMER/SLEEP button again until “TIMER” disappears from the display.

The unit will revert back to standby mode one hour after the timer has been activated.

SNOOZE

After the timer goes off, you can press the SNOOZE button. This will turn the sound off, and then back on five minutes later.

ACTIVATING THE SLEEP FUNCTION

Set the sleep timer as follows:

1

Press the POWER button to turn the unit on and tune the desired radio station or insert a CD as previously instructed.

2

Press the TIMER/SLEEP button and “90” will appear and “SLEEP” will blink in the display.

15

3

Press the TIMER/SLEEP button a second time to set the unit to turn off after 80 minutes. Each additional press with decrease the sleep time by 10 minutes. After the sleep time is set, you can press the TIMER/SLEEP button at any time to stop the Sleep function; “SLEEP” will disappear from the display.