MX3710.O/M.QXD 4/30/02 10:49 AM Page 11
OPERATING INSTRUCTIONS (CONTINUED)
REPEAT PLAYBACK
1 |
|
4 | 2 |
| 1 |
2 |
2 |
1 |
3 | 2 |
| 1 |
To repeat a single track, press the REPEAT/PRE UP button ❶ twice; “REPEAT” will blink in the display. Press the TUNING/CD SKIP/ SEARCH (
) ❷ or (
) button
❸to select the specific track that you wish to repeat. When the desired track number appears in the display, press the PLAY/PAUSE (❿ 
) button ❹ to begin playback. The specific track you selected will be repeated continuously.
To repeat all of the tracks on a disc continuously, press the REPEAT/PRE UP button ❶ once; “REPEAT” will light solid in the display. Press the CD PLAY/PAUSE (❿ 
) button ❷ to begin all tracks repeat.
To cancel Repeat Playback, press the REPEAT/PRE UP button ❶ until “REPEAT” disappears from the display. You can also cancel Repeat Playback by pressing the CD OPEN/ CLOSE button ❷.
PROGRAMMED PLAYBACK
The CD player in this unit has a 20 track programmable memory that allows you to program up to 20 tracks on any disc for playback in any desired order. You may program 20 different tracks or you may also program certain tracks to play more than once.
To perform programmed playback, proceed as follows:
1 |
2 |
3 |
Press the BAND/STOP (■) button to select CD.
Press the CD OPEN/CLOSE button to open the CD compart- ment door.
Gently press a CD onto the center spindle, with the printed label side facing out. Close the CD compartment door.
Press the MEMORY/TIME SET button;
PROGRAMMED PLAYBACK SECTION CONTINUED ON NEXT PAGE.
11
