Preparation for USE, Battery Operation

AC Plug

AC Outlet

PREPARATION FOR USE

SPEAKER CONNECTION 1. Place the speakers in convenient locations on either side of the unit.

Usually a distance of ﬁve to eight feet between speakers provides the best stereo effect, but this may vary depending on the size and

acoustics of the room.

2. Locate the Speaker Jacks on the rear of the unit and connect the dashed black wires to the red (+) terminals and connect the solid

black wires to the black (–) terminals.

3.To connect the speakers, press the terminal down, insert the speaker wire and press the terminal back to the lock position.

4.Pull lightly on the connection to make sure it is secure.

CAUTION: Only connect the speakers which are supplied with the unit. The use of any other or additional speakers may cause damage to the unit. Never operate the unit without the speakers connected.

BATTERY OPERATION

The battery compartment is located on the rear of the remote control.

•Remove the battery compartment door by pressing down and sliding the door in the direction of the arrow.

•Insert two (2) AA size batteries into the battery compartment as shown to the right. Be sure to observe the polarity markings which are engraved inside the battery compartment. If the batteries are inserted incorrectly, the remote control will not operate.

•Replace the battery compartment door.

BATTERY PRECAUTIONS

Follow these precautions when using batteries in this device:

1.Use only the size and type of batteries speciﬁed (alkaline are recommended).

2.Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device.

3.Do not mix different types of batteries together (e.g. Alkaline, Carbon-zinc or rechargeable) or old batteries with fresh ones.

4.If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

5.Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer’s directions.)

AC CONNECTION

Unwind the AC cord and extend it to its full length. Insert the end of the

AC cord into any convenient 120V 60Hz household outlet. Please note that this unit is equipped with a polarized AC plug which has one blade wider than the other. This is a safety feature to reduce the

likelihood of electric shock. This polarized AC plug will only fit in a polarized AC outlet. If you find that you cannot insert this plug into your outlet, you may have an obsolete non-polarized outlet. Please do not try

to defeat this safety feature by using a non-polarized adapter or by filing the wider blade to make it fit into your outlet. If this plug does not fit into your outlet, you should contact a qualified licensed electrician to replace your obsolete outlet.

REMOTE SENSOR

To operate the unit with the remote control, point the remote at the remote sensor on the front of the main unit and press the appropriate button. The remote control has an effective operating range of approximately 15 feet and an angle of no more than 30°.

NOTE: Bright sunlight may interfere with the operation of the remote control.

MX4107 specifications

The Memorex MX4107 is a versatile all-in-one printer that brings together innovation and user-friendly functionality for both home and small office environments. This sleek device seamlessly integrates printing, scanning, copying, and faxing capabilities, making it a perfect solution for varied document management needs.

One of the standout features of the MX4107 is its high-resolution printing capability. With vibrant color output and sharp text, users can expect quality results whether they're producing professional documents or creative projects. The printer boasts impressive speeds, allowing for rapid printing of multiple pages. This efficiency is especially beneficial for tasks that require large volume outputs, ensuring time management is optimized.

The MX4107 employs advanced inkjet technology, which not only enhances the quality of the printed materials but also contributes to cost efficiency. The printer uses individual ink cartridges, allowing users to replace only the colors that have run out, reducing waste and overall printing costs. Moreover, the printer's compatibility with a variety of media types offers flexibility for different printing needs, including envelopes, labels, and specialty papers.

This device is designed with user convenience in mind. It features a straightforward control panel, complete with an LCD screen that simplifies navigation through its myriad features. The built-in scanner offers high-resolution scanning options, enabling users to digitize documents with clarity and ease. Furthermore, the copier function allows for quick duplication of important documents, streamlining workflows.

Connectivity is another significant advantage of the MX4107. With USB and wireless options available, users can connect to the printer effortlessly, whether from a desktop or mobile device. The printer also supports mobile printing protocols, allowing users to print directly from their smartphones or tablets through various applications.

Designed for energy efficiency, the MX4107 adheres to environmentally conscious practices, making it a responsible choice for users who prioritize sustainability. Its compact design fits perfectly in any workspace, ensuring it doesn't take up unnecessary room while still providing robust functionality.

Overall, the Memorex MX4107 stands out for its combination of high-quality output, versatility, and user-friendly features, making it an ideal choice for those in need of a reliable multi-functional printer that enhances productivity and supports various printing tasks. Whether for personal use or professional tasks, the MX4107 is a compelling device that meets the demands of modern printing needs.

Memorex MX4107 manual Preparation for USE, Battery Operation, AC Connection, Remote Sensor

Models: MX4107