OPERATING INSTRUCTIONS (CONTINUED)
LISTENING TO THE RADIO
1 |
2 |
3 |
Press the POWER button to turn the unit on.
Press the TUNER Function button to select the radio.
Press the STOP/BAND (■) button on the main unit to select AM or FM.
4 | 5 |
| 1 |
| 2 |
1
2
6 |
|
|
1 | 2 | 2 |
MANUAL TUNING: Repeatedly press the Tune/Skip/Search n 1 or o 2 button to manually advance the frequency in the display up or down until the desired frequency appears.
AUTOMATIC TUNING: Press and hold the Tune/Skip/Search n 1 or o 2 button until the frequency in the display starts to scan, and then release the button; the tuner will search and then stop on the next strong station it finds. Repeat this step until the desired frequency appears in the display.
Adjust the PRESET EQ button ❶ and VOLUME buttons ❷ as desired.
NOTE: If the FM STEREO band is selected and you have tuned to an FM Stereo station, STEREO will light in the display.
Hints for Better Reception
AM - The AM ferrite bar antenna is located inside the unit. It may be necessary to turn the unit slightly so that the internal antenna is pointing in the direction of the AM transmitter. You may have to experiment to find the position that provides the strongest reception for each of your favorite AM stations.
FM - Extend the FM wire antenna for best FM reception.
7
