OPERATING INSTRUCTIONS
SETTING THE CLOCK
1 |
2 |
3 |
2 |
1 |
With the power off, press the MEM/CLOCK SET button; the time will blink in the display.
Press the Tune/Skip/Search o button to set the current hour.
Press the Tune/Skip/Search n button 1 to set the current minute, then press the MEM/ CLOCK SET button 2 again and the time will be set.
PRESET EQ | MUTE |
1 | 1 |
HEADPHONE JACK
With the power on, press the PRESET EQ button to cycle through the preset EQ settings or to turn the EQ off. Each press of the PRESET EQ button will cycle as follows: CLASSIC, ROCK, POP, JAZZ, Off.
To temporarily mute the sound, press the Mute button on the remote control; “MUTE” will appear in the display and the sound will be muted. Press the MUTE button again to restore the sound and “MUTE” will disappear from the display.
To listen to the unit through headphones, simply insert the headphones (not included) into the Headphones jack. The speakers will be disconnected when the Headphones are plugged in.
DISPLAY BUTTON
1 |
WHILE IN THE RADIO OR CD STOP MODE:
Press the DISPLAY button on the remote once to show the clock on the display. Press a second time to show the timer on time. Press a third time to show the timer off time. Press again or wait five seconds and the display will show the radio frequency or total tracks/time of the CD.
WHILE PLAYING A CD:
Press the DISPLAY button on the remote once to show the remaining time of the CD on the display. Press a second time to show the clock. Press a third time to show the timer on time. Press a fourth time to show the timer off time. Press again or wait five seconds and the display will show the elapsed time of the CD.
6
