Memorex MX4111 Repeat Playback, Programmed Playback, Operating Instructions Continued

MX4111.O/M.QXD 7/11/02 4:06 PM Page 11

OPERATING INSTRUCTIONS (CONTINUED)

REPEAT PLAYBACK

1
3	2
1

2

2

1

3

To repeat a single track, press the REPEAT/PRESET UP button ❶ once; “REPEAT” will blink in the display. Press the TUNING/SKIP/

Search ❷ or ❸ button to select the specific track that you wish to repeat. When the desired track number appears in the display, press the PLAY/PAUSE (❿ ) button ❹ to begin playback. The specific track you selected will be repeated continuously.

To repeat all of the tracks on a disc continuously, press the REPEAT/PRESET UP button ❶ twice; “REPEAT” will light solid in the display. Press the CD PLAY/PAUSE (❿ ) button ❷ to begin all tracks repeating.

To cancel Repeat Playback, press the REPEAT/PRESET UP button until “REPEAT” disappears from the display.

PROGRAMMED PLAYBACK

The CD player in this unit has a 20 track programmable memory that allows you to program up to 20 tracks on any disc for playback in any desired order. You may program 20 different tracks or you may also program certain tracks to play more than once.

To perform programmed playback, proceed as follows:

1

2

3

Press the STOP/BAND (■) button to select CD.

Press the OPEN/CLOSE button and insert a CD with the label side facing up.

Press the MEMORY/TIME SET button. “P-01” (program number), “01” (track number) will appear and “MEMORY” will blink in the display.

PROGRAMMED PLAYBACK SECTION CONTINUED ON NEXT PAGE.

11