OPERATING INSTRUCTIONS (CONTINUED)
LISTENING TO THE RADIO
Press the POWER button to turn the unit on; the Standby indicator will go out.
Press the FUNCTION button to select the Tuner mode; the AM or FM frequency will appear in the display.
Press the STOP (■)/BAND button to select AM or FM.
NOTE: If you select the FM band, be sure to extend the FM Wire Antenna.
2 | 1 |
MANUAL TUNING: Repeatedly press the Tune/Skip/Search n 1 or o 2 button to manually advance the frequency in the display up or down until the desired frequency appears.
Press the POWER button to turn the unit off; the Standby indicator will light.
2 | 1 | 2 |
|
| 1 |
AUTOMATIC TUNING: Press | Adjust the PRESET EQ button ❶ | |
and hold the Tune/Skip/Search n | and VOLUME control ❷ as | |
1 or o 2 | button until the | desired. |
frequency in the display starts to | NOTE: If the FM band is selected | |
scan, and then release the button; | and you have tuned to an FM | |
the tuner will search and then | Stereo station, “STEREO” will | |
stop on the next strong station it | light in the display. | |
finds. Repeat this step until the |
| |
desired frequency appears in the |
| |
display. |
|
|
Hints for Better Reception
NOTE: When you turn the unit off and then back on again, the volume setting will remain at the level it was when the unit was turned off.
9