PREPARATION FOR USE (CONTINUED)
CONNECTING AN EXTERNAL UNIT TO THE AUX IN JACKS
You can connect an external unit to this unit, such as a cassette player, etc. Simply connect an audio/video cable (not included) from the AUX IN jacks of this unit to the external unit’s AUX OUT jacks. This will allow you to broadcast the external unit’s sound through this unit. Make sure both units are turned on and press the FUNCTION button to select “AUX” to use the external unit.
NOTES:
From
Aux
In
MX4122
• Connecting the unit to an external audio source will allow you to broadcast the external unit’s sound through this unit’s speakers.
• When connecting the external unit, refer to the owner’s manual of the external unit, as well as this manual.
• When connecting the external unit, make sure the power is
off and both units are unplugged before making any connections.
EXTERNAL UNIT
To
Aux Out
BATTERY OPERATION FOR THE REMOTE CONTROL The battery compartment is located on the rear of the remote control.
1. Remove the battery compartment door by pressing in on the tab and lifting the door off.
2. Insert two (2) AAA size batteries (not included) into the battery compartment as shown to the right. Be sure to observe the polarity markings which are engraved inside the battery compartment. If the batteries are inserted incorrectly, the remote control will not operate.
3. Replace the battery compartment door.
+
–
–
+
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer’s directions.)
HEADPHONE JACK
For private listening, connect 3.5mm (32 ohm) stereo headphones (not included) to this jack. The speakers are automatically disconnected when the headphone plug is inserted in the jack.
5
