OPERATING INSTRUCTIONS (CONTINUED)
2 | 1 |
Press the Tune/Skip/Search n 1 or o 2 button to select the first track that you wish to program.
MP3/WMA: If using an MP3/WMA, you will first select the album/folder using the FOLDER UP 1 or DOWN 2 buttons, then press the PROGRAM/CLOCK SET button 3 to confirm, then select the first desired track inside the album/folder.
Use the Tune/Skip/Search n 1 or o 2 button and/or the SKIP TRACKS +10
NOTE: You can only program 10 tracks when playing a MP3/WMA disc.
When the desired track number appears in the display, press the PROGRAM/CLOCK SET button again.
Repeat steps 4 through 7 until you have programmed up to 20 track numbers into the CD Program Memory. When the memory is full, “FULL” will appear in the display again.
2 | 1 |
After programming up to 20/10 (see note below) tracks in the CD Program Memory, press the PLAY/PAUSE (®p) button 1 to begin programmed playback. “MEM” will appear in the display and playback will begin on the first track that you programmed. The player will continue to play all of the tracks that you programmed in the order in which you programmed them. When the last programmed track has been played, the player will stop and the display will again show the total number of folders (for MP3/WMA discs only)/tracks/playing time on the disc. If you press the PLAY/PAUSE (®p) button 1 again, playback will start on the first track you programmed and will continue until all the programmed tracks have been played. To clear the programmed memory and cancel the Programmed Playback mode, press the STOP (■)/BAND button 2 once while in the Stop mode. "MEM" will disappear from the display.
NOTES:
• To check the programmed tracks, while in the Stop mode, press the PROGRAM/CLOCK SET button repeatedly to view the programmed tracks.
• The CD player in this unit has a 20 or 10 track programmable memory (20 tracks for standard CD, 10 tracks for MP3/WMA CD).
15
