Memorex MX4139 manual Repeat Playback Of One Track Or All Tracks, Programmed Playback

REPEAT PLAYBACK OF ONE TRACK OR ALL TRACKS

	2	3		2
		1		1
To repeat a single track, while in					To cancel Repeat Playback,
				To repeat all of the tracks on a
the	Stop mode,	press	the	disc continuously, while in the	press the P-MODE/MEMO. Up
P-MODE/MEMO. Up button ❶				Stop mode, press the	button repeatedly until the mode
once; “REPEAT” will blink in the				P-MODE/MEMO. Up button ❶	indicators disappear from the
display. Press the Tune/Skip/				twice; “REPEAT” will light solid in	display.
Time Down (-) 2 or Up (+) 3				the display. Press the PLAY/
button to select the specific track				PAUSE (®p) button ❷ to begin
that you wish to repeat. While the				all tracks repeating.
desired track number is blinking in
the	display,	press	the
PLAY/PAUSE (®p) button			❹ to
begin playback. The specific track
you selected will be repeated
continuously.

PROGRAMMED PLAYBACK

The CD player in this unit has a 20 track programmable memory that allows you to program up to 20 tracks on any disc for playback in any desired order. You may program 20 different tracks or you may also program certain tracks to play more than once.

To perform programmed playback, proceed as follows:

Repeatedly press the FUNCTION	Press the CD OPEN button and	Press the PROG./MEMO./Clock
button to select CD.	gently press a CD onto the center	Set button; “P01” (program
	spindle with the label side facing	number) will appear, "MEMORY"
	forward and close the CD	will blink and then “00” (track
	compartment.	number) will blink in the display.
	NOTE: 3 inch single or standard
	CDs can be used with this unit.

PROGRAMMED PLAYBACK SECTION CONTINUED ON NEXT PAGE

14