TURNTABLE
PHONO
CONTROLS AND FEATURES
1.Turntable platter
2.Cueing lever
3.Speed selector
4.Tone arm
5.Tone arm rest
6.45 rmp Adaptor
PLAYING A RECORD:
1.Switch the system on using the POWER button.
2.Remove the stylus cover.
3.Unlock the tone arm using the tone arm lock.
4.Use the function selector to select the PHONO / AUX position.
5.Set the speed selector to either 33 rpm or 45 rpm according to the recordd to be played.Use the 45 rpm sprindle adaptor to play 45 rpm records which do not have a cente.
6.Place a record on the turntable. Using the cueing lever, raise the tone arm. Move the tone arm outwards, away from the turntable platter. The turntable platter will start to rotate.
7.Move the tone arm over the record and release gently lower the Cueing Lever, The stylus will lower onto the record and start to play.
PHONO
! !
!
" #
"
#
$ 
8.Adjust the VOLUME control to obtain the desired listening level.
9.Adjust the graphic equalizer to suit your listening pleasure.
10.During play(if you wish so) move the tone arm inwards towards the center of the turntable platter, thus switching it off, Ensure the tone arm is replaced and locked correctly using the tone arm lock. This will avoid damage to the stylus when the record deck is not in use.
11.When the record has finished playing, the turntable platter will switch off automatically. Secure tone arm using the tone arm lock.
NOTE: If you input signal from AUX jack while Phono is playing, you may hear both simultaneously.
14
