CD CHANGER
• Total remaining time of current disc
2 | 1 | 5 |
| ||
3 |
| 4 |
• Total playing time of current disc.
2 | 1 | 5 |
| ||
3 |
| 4 |
CD PROGRAM ( CD MEMORY )
1.In CD stop mode, press the MEMO /
2.The track number, program number and “ MEMORY” indicators will flash.
2 | 1 | 5 |
| ||
3 |
| 4 |
3.Select the number of disc by pressing the DISC SKIP button, and press the TUNING • UP / NEXT or TUNING
• DOWN / PREVIOUS button until the desired track number that you wish to program appears on the dis- play.
4.Press the MEMO /
2 | 1 | 5 |
| ||
3 |
| 4 |
5.Select another track number and store the track into the CD program by above step 3 to step 4.
NOTE: Up to 40 CD tracks (00 ~ 39) can be programmed.
6.After the CD program has been done, press the PLAY / PAUSE button to start playing the programmed tra- cks.
7.In CD stop mode, Press
/MEMO DN button on the front panel or remote con- trol to erase program.
NOTE: When the CD program has been done, you can only play the memory tracks. Unless you erase the CD program, the CD normal playing can not be resumed to do.
17