IMPORTANT SAFEGUARDS

CAUTION:

_Read all of these instructions.

_Save these instructions for later use.

_Follow all warnings and instructions marked on the audio equipment.

1.READ INSTRUCTIONS

All the safety and operating instructions should be read before the product is operated.

2. RETAIN INSTRUCTIONS

The safety and operating instructions should be retained for future reference.

3. HEED WARNINGS

All warnings on the product and in the operating instructions should be adhered to.

4.FOLLOW INSTRUCTIONS

All operating and use instructions should be followed.

5.WATER AND MOISTURE

The product should not be used near water, for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc.

6.CARTS AND STANDS

The product should be used only with a cart or stand that is recommended by the manufacturer.

6A. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

7. WALL OR CEILING MOUNTING

The product should be mounted to a wall or ceiling as recommended by the manufacturer.

8.HEAT

The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products ( including amplifiers ) that produce heat.

9.VENTILATION

The product should be situated so that its location or position does not interfere with its proper ventilation. For example, the product should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or, placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

10. POWER SOURCES

The product should be connected to a power supply only of the type described in the operating instructions or as marked on the product.

11. GROUNDING OR POLARIZATION

Precautions should be taken so that the grounding or polarization means of a product is not defeated.

12. POWER-CORD PROTECTION

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.

13. CLEANING

The product should be cleaned only as recommended by the manufacturer.

14. POWER LINES

An outdoor antenna should be located away from power lines.

15. OUTDOOR ANTENNA GROUNDING

If an outside antenna is connected to the receiver, be sure the antenna system is grounded so as to provide some protection against voltage surges an built up static charges. Section 810 of the National Electrical Code. ANSI/NFPA 70 provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See Figure.

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE

16.NONUSE PERIODS

The power of the product should be unplugged from the outlet when left unused for a long period of time.

17.OBJECT AND LIQUID ENTRY

Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.

18.DAMAGE REQUIRING SERVICE

The product should be serviced by qualified service personnel when: A. The power-supply cord or the plug has been damaged; or

B. Objects have fallen or liquid has been spilled into the product; or

C.The product has been exposed to rain; or

D. The product does not appear to operate normally or exhibits a marked change in performance; or

E. The product has been dropped, or the enclosure damaged.

19.SERVICING

The user should not attempt to service the product beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel.

20.NOTE TO CATV SYSTEM INSTALLER

This reminder is provided to call the CATV system installers attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

WARNING:

To reduce the risk of fire or electric shock, do not expose it is appliance to rain or moisture.

CAUTION:

Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure.

CAUTION

To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel

The lightning flash with arrowhead symbol within an equilat- eral symbol, with an equilateral triangle, is intended to alert user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance ( servicing ) instruction in the literature accompanying the appliance.

CAUTION

For Compact Disc Units only.

INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED.

AVOID DIRECT EXPOSURE TO LASER BEAM.

Page 2
Image 2
Memorex MX5520SPKA manual Important Safeguards, Water and Moisture

MX5520SPKA specifications

The Memorex MX5520SPKA is an innovative and versatile all-in-one printer designed to cater to the needs of both home and office environments. With its sleek design and compact footprint, it seamlessly fits into any workspace while offering a range of advanced features for efficient printing, scanning, copying, and faxing tasks.

One of the standout features of the MX5520SPKA is its impressive print speed, capable of delivering high-quality color prints at a rate of up to 30 pages per minute. This efficiency makes it ideal for busy professionals needing to produce documents quickly without sacrificing quality. The printer supports various media sizes, including letter, legal, and envelopes, which adds to its versatility for different printing requirements.

The MX5520SPKA also employs advanced inkjet technology, ensuring vibrant and sharp printouts with a maximum resolution of up to 4800 x 1200 dpi. This high resolution is particularly beneficial for printing detailed images and graphics, making it suitable for creative professionals as well. Additionally, the printer uses individual ink cartridges, allowing users to replace only the color that runs out, ultimately reducing costs and waste.

In terms of connectivity, the Memorex MX5520SPKA offers a broad range of options, including USB, Ethernet, and wireless capabilities. This allows users to print directly from their computers, laptops, and mobile devices with ease, thanks to built-in support for Apple AirPrint and Google Cloud Print. These connectivity options enhance remote printing capabilities, making it easy to work from anywhere in the home or office.

Another significant aspect of the MX5520SPKA is its user-friendly interface. It features a large LCD touchscreen that simplifies navigation through the various functions and settings, making it easy to operate for users of all skill levels. The printer also includes an automatic document feeder that can handle up to 50 sheets, enabling quick scanning and copying of multi-page documents.

Durability and eco-friendliness are also notable characteristics of the Memorex MX5520SPKA. It is designed to run efficiently and has features that help reduce energy consumption, such as automatic duplex printing. This ensures that users can complete their tasks while being mindful of their environmental impact.

Overall, the Memorex MX5520SPKA stands out as a reliable and efficient all-in-one printer that combines high performance with user-centric features, making it a solid choice for both personal and professional use. Its blend of speed, print quality, connectivity, and usability makes it an excellent addition to any home or office setup.