Memorex MX5520SPKA manual Tape Player, Recording Deck A

TAPE PLAYER

RECORDING [ DECK A ]

NOTE: To set up a CD program before recording, see page 17.

5.To stop recording , press the STOP / EJECCT button on [ DECK A ] ,and at this time , the CD playback will be in the Pause mode, if you press the RECORD and PLAY buttons on [ DECK A ] again, the CD playback will continue playing automatically.

6.To stop or pause of CD playback, press STOP button or PLAY / PAUSE button of CD controls.

Recording from TUNER to TAPE

1.Insert a blank tape into [ DECK A ].

2.Select the TUNER function by pressing the TUNER / BAND button on the front panel or remote control.

3.Press the TUNER / BAND button repeatedly until the desired band (FM or AM) is selected.

4.Press the TUNING • UP / NEXT or TUNING • DOWN / PREVIOUS button to select the desired frequency.

5.Press the RECORD and PLAY button on [ DECK A ] to start TUNER-to-TAPE recording.

6.To stop or pause recording, press the STOP/EJ or PAUSE button on [ DECK A ].

NOTE: The HSD function does not operate during CD-to- TAPE or TUNER-to-TAPE recording.

SEQUENTIAL PLAYBACK [ DECK B ] TO [ DECK A ]

NOTE: The sequential play feature automatically plays [ DECK A ] after [ DECK B ] has played and shut off.

1.Insert a tape into [ DECK A ] and [ DECK B ].

2.Press the PLAY button on [ DECK B ] to begin play- back.

3.Press the PAUSE button on [ DECK A ].

4.Press the PLAY button on [ DECK A ]. When the tape in [ DECK B ] reaches the end, the PAUSE button on [ DECK A ] will release automatically and playback will begin.

19