Memorex MX7300 manual Repeat Playback, Programmed Playback

OPERATING INSTRUCTIONS (CONTINUED)

REPEAT PLAYBACK

7	8	9
1	0
1
		2

2	0
1
4	2
	3

3

To repeat all of the tracks on a disc continuously, first press the PLAY/PAUSE (®p) button 1 to begin playback. Press the REPEAT/MEM Up button 2 once; “REPEAT” will light solid in the display and the CD will repeat all the tracks continuously.

To repeat a single track, first press the PLAY/PAUSE (®p) button ❶ to begin playback. Select a track to repeat using the Tune/Skip/Search n 2 or o 3 button. When the desired track number appears in the display, press the REPEAT/MEM Up button ❹ twice; “REPEAT 1” will appear in the display. The specific track you selected will be repeated continuously.

To cancel Repeat Playback, press the REPEAT/MEM Up button until “REPEAT” disappears from the display.

PROGRAMMED PLAYBACK

The CD player in this unit has a 60 track programmable memory that allows you to program up to 60 tracks on any disc for playback in any desired order. You may program 60 different tracks or you may also program certain tracks to play more than once.

To perform programmed playback, proceed as follows:

1

2

Label

Side

3	4	5	6
	7	8	9
		0
		2
		1

Press the CD Function button.

Insert a CD into the CD compartment LABEL SIDE FACING FRONT.

Press the STOP (■) button 1 to stop automatic playback. Press the MEMORY button 2; “MEMORY” and “00 P-01” will appear in the display.

PROGRAMMED PLAYBACK SECTION CONTINUED ON NEXT PAGE.

12