OPERATING INSTRUCTIONS (CONTINUED)
LISTENING TO THE RADIO
1 | 2 |
3 |
|
1 | 2 |
|
Press the ON/STANDBY button to turn the unit on; the IR/Standby indicator will turn off.
4 |
|
2 | 1 |
Press the TUNER/BAND Function | |
button to select the radio. |
|
5 |
|
2 | 1 |
Press the TUNER/BAND button 1 to select AM or FM. If listening to FM, select the Stereo or Mono by pressing the FM MODE button 2. NOTE: Noise present while listening in Stereo can be reduced by pressing the FM MODE button 2 to select Mono.
6 | 0 | 1 |
|
| 2 |
|
| 2 |
MANUAL TUNING: Repeatedly
press the Tune/Skip/Search n 1 or o 2 button to manually advance the frequency in the display up or down until the desired frequency appears.
AUTOMATIC TUNING: Press
and hold the Tune/Skip/Search n 1 or o 2 button until the frequency in the display starts to scan, and then release the button; the tuner will search and then stop on the next strong station it finds. Repeat this step until the desired frequency appears in the display.
Adjust the EQ button 1 and VOLUME buttons 2 as desired. NOTE: If the FM STEREO band is selected and you have tuned to an FM Stereo station, STEREO will light in the display.
Hints for Better Reception
The AM and FM antennas are located inside the unit. It may be necessary to turn the unit slightly for the best reception. You may have to experiment to find the position that provides the strongest reception for each of your favorite stations.
8
