Meridian America DSP Loudspeaker, Meridian DSP manual C.Fre, C.Tilt+1, Store, To store the settings

CONFIGURING THE

DSP LOUDSPEAKERS

To adjust the centre frequency response and tilt offset

If your system includes a DSP centre speaker you should set Centre Y on the master speaker. An additional frequency response option is then provided to allow you to adjust the centre speaker, with the options:

C.Fre, C.bou, C.Sb1, C.Sb2, and C.Cor.

¥Press Function > or Function < until the display shows the current centre frequency response.

For example: C.Fre

¥Press Function A or Function V to select the appropriate option for the centre speaker.

An additional centre tilt offset option is also provided. The centre tilt offset is added to the treble value for the selected source. The recommended setting is -1dB when the speaker is positioned above a television.

¥Press Function > or Function < until the display shows the current centre tilt offset.

For example: C.Tilt+1

¥ Press Function A or Function V to adjust the centre tilt offset.

To store the settings

Once you have adjusted the frequency response for the speakers in your system you should store the settings using the following procedure:

¥Press Function Store.

The display shows: Store

¥ Turn off the DSP loudspeaker using the power switch on the back panel.

When you turn on the power again the speaker will operate normally with the frequency response settings you have stored.

36