Changing the DSP preset for a source
Customising the digital surround processor
Each source has an appropriate DSP preset associated with it for each music format. For example, for a standard stereo (PCM) signal the CD source uses Trifield and the TV source uses TV Logic.
This section explains how to change the DSP preset associated with any source.
To change the DSP preset for a source
●Make sure the menus are unlocked; see To unlock the menus, page 22.
●Select the source you want to change, by pressing the Source key on the front panel or the appropriate source button on the remote; eg CD.
●If necessary, select a signal in the appropriate format. For example, to change the DSP preset used for DTS compact discs, play a DTS CD.
●Press > or < to display the DSP preset currently associated with that source.
Music
For example:
●Press A or V until the display shows the new DSP preset you want to store.
Trifield
For example:
●Press Store to save the new association.
The display shows the source and | CD=Trifield | |
preset you have stored; for example: | ||
|
After a short delay the display will revert to the normal display of DSP preset and volume.
30