888 Digital 565 manual Changing the DSP preset, To change the DSP preset

Changing the DSP preset

Using the digital surround processor

18

Each source has a set of DSP presets associated with it, one for each of the alternative audio formats: two-channel (PCM), Dolby Digital, DTS, MPEG, and MLP.

When you choose a source an appropriate DSP preset is selected for the incoming audio format.

For example, if you have selected the CD source and are playing a conventional CD, the Trifield DSP preset will initially be selected. You may then wish to choose a different DSP preset, such as Music or Ambisonic.

You can also change the default DSP preset associated with the source; See Changing the DSP preset for a source, page 30.

To change the DSP preset

● Press > or < until the display shows Music the current DSP preset; for example:

●Press A or V to step between the different DSP presets.

If you are using a Meridian DSP Loudspeaker, display the current preset by pressing Function > or Function <, and change the preset by pressing Function A or Function V.

You will be able to choose any of the predefined DSP presets, or any user-defined presets you have stored.

The following table gives the sequence of DSP presets for each audio format, followed where appropriate by the abbreviated name used on the display:

Audio format	Presets
Two-channel (PCM)	Direct, Music, Trifield, Ambisonic
	(Ambisonic), Super Stereo (Super),
	Stereo, Music Logic (MusLogic),
	Pro Logic (ProLogic), THX Cinema
	(THX), Mono, Academy, TV Logic
Dolby Digital	Dolby Digital (Digital),
	Dolby Digital THX (Dig THX)
DTS	DTS, DTS THX, DTS Music (DTS Mus)
MPEG	MPEG, MPEG THX,
	MPEG Music (MPEG Mus)
MLP (MLP version only)	MLP

In each case these will be followed by any user-defined presets you have stored for the appropriate audio format.