| ENGLISH | |
Table of Contents | |
1. | Device overview | 7 |
2. | Please Read First! | 8 |
3. | Safety | 8 |
3.1 | Specified conditions of use | 8 |
3.2 | General safety information | 8 |
3.3 | Safety devices | 9 |
4. | Operation | 9 |
4.1 | Mains connection | 9 |
4.2 | Generating compressed air | 9 |
5. | Care and Maintenance | 9 |
5.1 | Periodic maintenance | 9 |
5.2 | Device storage | 9 |
6. | Trouble Shooting | 9 |
7. | Repairs | 10 |
8. | Environmental Protection | 10 |
9. | Technical Specifications | 10 |
2. Please Read First!
•Read these instructions before use. Pay special attention to the safety information.
•If you notice transport damage while unpacking, notify your supplier immediately. Do not operate the device!
•Dispose of the packing in an envi- ronmentally friendly manner. Take to a proper collecting point.
•Keep these instructions for refer- ence on any issues you may be uncertain about.
•If you lend or sell this device be sure to have the instructions to go with it.
3. Safety
3.1Specified conditions of use
This device is intended to generate com- pressed air required for the operation of air tools.
Any use for medical purposes, food processing as well as filling of oxygen cylinders for breathing equipment is not permitted.
Explosive, combustible gases or gases detrimental to health may not be com- pressed. Operation in hazardous loca- tions is not permitted.
Any other use is not as specified. Use not as specified, alteration of the device or use of parts that are not approved by the equipment manufacturer, can cause unforeseeable damage!
Children, juveniles and persons not hav- ing been instructed in its usage are not permitted to operate this device and any air tools connected to it.
3.2General safety information
When using this electric tool observe the following safety instructions, to exclude the risk of personal injury or material damage.
Please also observe the special safety instructions in the respective chapters; Keep all documents, supplied with the device, for future reference.
Observe the statuary accident insurance institution regulations and regulations for the prevention of accidents pertaining to the operation of air compressors and air tools, where applicable.
AGeneral hazard!
Keep your work area tidy – a messy work area invites accidents.
Be alert. Know what you are doing. Set out to work with reason. Do not operate electric tool while under the influence of drugs, alcohol or medication.
Consider environmental conditions. Keep work area well lighted.
Prevent adverse body positions. Ensure firm footing and keep your balance at all times.
Do not operate electric tool near inflam- mable liquids or gases.
Keep bystanders, particularly children, out of the work area. Do not permit other persons to touch the tool or power cable while the electric tool is running.
Do not overload electric tool – use it only within the performance range it was designed for (see Technical specifica- tions).
BDanger! Risk of electric shock!
Do not expose electric tool to rain.
Do not operate electric tool in damp or wet environment.
Prevent body contact with earthed objects such as radiators, pipes, cooking stoves or refrigerators when operating this electric tool.
Do not use the power cable for any pur- pose it is not intended for.
ARisk of personal injury by escaping compressed air and parts hurled about by escaping air!
Never direct compressed air against per- sons or animals!
Ensure all air tools and accessories used are designed for the working pres- sure or are supplied via a pressure regu- lator.
Please note that, when disconnecting the quick coupler, the compressed air contained in the pressure hose will escape all of a sudden. You should therefore firmly hold the air hose when disconnecting it.
Ensure all screwed connections are fully tightened at all times.
Do not attempt to repair the device your-
self! Only trained specialists are permit- ted to service or repair compressors, pressure vessels and air tools.
AHazard generated by oil-satu- rated compressed air!
Use oil saturated compressed air only for air tools requiring such supply. Do not use an air hose used to supply com- pressed air containing oil to supply air tools not designed for operation on com- pressed air containing oil. Do not fill tires with compressed air containing oil.
ARisk of burns from the sur- faces of parts carrying compressed air!
Let device cool off before servicing.
ARisk of personal injury and crushing by moving parts!
Do not operate the device without installed guards.
Please note that the device will start automatically when the pressure falls off to minimum! – Disconnect from power supply prior to any servicing.
Ensure that when switching on (e.g. after servicing) no tools or loose parts are in the electric tool.
AHazard generated by insuffi- cient personal protection gear!
Wear hearing protection. Wear safety glasses.
Wear mask respirator when work gener- ates dust or mist detrimental to health. Wear suitable work clothes When work- ing outdoors wearing of non-slip shoes is recommended.
AHazardtool defects!generated by electric
Keep electric tool and accessories in good repair. Observe the maintenance instructions.
Prior to any use check the electric tool for possible damage: before using the electric tool carefully check safety devices, protection devices or slightly damaged parts for proper function as specified. Check to see that all moving parts work properly and do not jam. All parts must be correctly installed and meet all conditions necessary for the proper operation of the electric tool.
Damaged protection devices or parts must be repaired or replaced by an qual- ified specialist. Have damaged switches replaced by a service centre. Do not operate electric tool if the switch can not be turned ON or OFF.
Keep handles free of oil and grease.
