ACURA INTEGRA 1994-2001
1Disconnect the negative battery terminal to pre- vent an accidental short circuit.
2Remove the cover cap located under the emer- gency brake and remove (2) screws exposed. Remove (2) screws from the rear corners of the lower dash trim bezel and remove. Remove the ashtray and (2) screws exposed. Unsnap the ashtray housing and disconnect the cigarette lighter harness. Remove the gear shifter knob and unsnap the shifter trim. Remove (2) screws below the radio opening and remove the upper dash trim bezel. Remove (2) 8mm screws secur- ing the factory head unit and disconnect the wiring. (Fig. A)
3Cut and remove all mounting clips on the Radio Housing EXCEPT clips "C" and "H" (Fig. A). Cut and remove the slots on the bottom of the ISO Brackets (Fig. B). (THE REAR SUPPORT TRAY WILL NOT BE USED). (Fig. B)
Skip to step #3b on Page 10.
A
B | 2 | "C" | Fig. A |
|
|
| |
|
|
| "C" |
|
|
| "H" |
|
| Fig. B | "H" |
ACURA LEGEND 1990-1996
1Disconnect the negative battery terminal to pre- vent an accidental short circuit.
2Remove (2) screws below the ashtray. Unclip the dash trim bezel. Disconnect the cigarette lighter wiring and remove the bezel. Remove (2) bolts securing the rear of the factory head unit and disconnect the wiring. (Fig. A)
3Attach the Mounting Bracket to the bottom of the Rear Support Tray (Fig. A). Cut and remove all mounting clips on the Radio Housing EXCEPT clips "E" and "J". (Fig. B)
Skip to step #3b on Page 10.
A
BFig. A
Fig. B
"E"
"J""E"
"J"
2
