Metra Electronics AFDI-RSE-01 installation instructions

AFDI-RSE-01 AFDI-RSE-01 FORD/LINCOLN/MERCURY INTERFACE

KNOWLEDGE IS POWER

Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry.

Log onto www.installerinstitute.com or call

800-354-6782 for more information and take steps toward a better tomorrow.

REV. 03/11/10	INSTAFDI-RSE-01
1-800-221-0932	www.axxessinterface.com

AFDI-RSE-01

INSTALLATION INSTRUCTIONS

*READ IMPORTANT WARNING ON PAGE 1 BEFORE ATTEMPTING ANY INSTALLATION

The aftermarket radio to be installed should have an auxiliary RCA audio input or another way of bringing audio into the radio

(I.E. FM modulator)

The AFDI-RSE-01 is designed to retain the Rear Seat Entertainment feature of the Ford/Lincoln/Mercury vehicles listed in the Applications section. The overhead video system no longer works when the OEM radio is removed since the OEM radio sends out DATA commands to keep the overhead sys- tem working. The AFDI-RSE-01 will send the correct DATA commands to keep the overhead system working properly, and provide the audio from the over- head to the aftermarket radio. If your vehicle has a 3.5mm aux jack the ADFI- RSE-01 will retain it by providing a RCA audio input to your radio.

INTERFACE COMPONENTS

• Interface

• AFDI-RSE-01 harness

APPLICATIONS

Ford	Lincoln
Edge - 2007-10	MKX – 2007-10
Expedition - 2007- 10	Navigator – 2007-10
Explorer - 2007-10
Explorer Sport Trac - 2007-10	Mercury
F-150 - 2009-10	Montego - 2007
Five Hundred – 2007	Mountaineer – 2008-10
Flex – 2009-10	Sable - 2008
Taurus - 2008-10
Taurus X – 2008

1-800-221-0932 www.axxessinterface.com

4 ©Copyright 2010 Metra Electronics Corporation ©Copyright 2010 Metra Electronics Corporation