Metrologic Instruments IS6520 APPENDIX B

APPENDIX B

Many functions of the scanner can be "programmed" - that is, enabled or

disabled. The scanner is shipped from the factory programmed to a set of default

conditions. The default parameter of the scanner has an asterisk (*) in the charts

on the following pages. If an asterisk is not in the default column then the default

setting is Off or Disabled. Every communication does not support every

parameter. If the communication supports a parameter listed in the charts on the

following pages, a check mark will appear.

Parameter Default RS-232* Light Pen

UPC/EAN *aa

Code 128 *aa

Code 93 *aa

Codabar aa

Interleaved 2 of 5 (ITF) *aa

MOD 10 Check on ITF aa

Code 11 aa

Code 39 *aa

Full ASCII Code 39 aa

MOD 43 Check on Code 39 aa

MSI-Plessey aa

MSI-Plessey, 10/10 Check Digit aa

MSI-Plessey, MOD 10 Check Digit *aa

Paraf Support aa

ITF Symbol Lengths Variable aa

Minimum Symbol Length 4 aa

Symbol Length Lock None aa

Bars High as Code 39 *a

Spaces High as Code 39 a

Bars High as Scanned a

Spaces High as Scanned a

DTS/SIEMENS