Metrologic Instruments IS6520 S CANNER AND A

SCANNER AND ACCESSORIES

The following is a list of the parts included in the IS6520/MS6520 Kit.

• Cubit® IS6520/MS6520 - Omnidirectional Scanning Engine

• Installation and User’s Guide* – MLPN 00-02421

• MetroSelect® Scanner Configuration Guide*

MLPN 00-02407 or MLPN 00-02561

*Available for download on Metrologic’s website, www.metrologic.com .

The following items are dependent on the type of IS6520/MS6520 Kit ordered.

Some items may not be included in your kit.

• AC to DC Power Transformer - Regulated 5.2 VDC @ 650 mA output.

One of the following may be included:

120 VAC United States – MLPN 45-45593

220 VAC – 240 VAC Continental European – MLPN 45-45591

220 VAC – 240 VAC United Kingdom – MLPN 45-45592

• PowerLink Cable with built in power jack (IS6520-41/MS6520-41 only)

One of the following may be included:

Standard - MLPN 53xxx* - 2.7 m (9') coiled cord, long strain relief

Optional - MLPN 54xxx* - 2.1 m (7') straight cord, short strain relief

*xxx specifies connection to the host

• Keyboard Wedge Powerlink and Adapter Cable – MLPN 54-54002

Powerlink cable with a 5-pin DIN female connector and a 6-pin mini Din male

connector and an adapter cable with a 5-pin DIN male connector and a 6-pin

mini DIN female connector. (IS650-47/MS6520-47 only)

• Mounting Hardware - Three M3 screws are included for mounting

purposes.

• Tilt Stand - MLPN 46-46486

• Fixed Vertical Stand - MLPN 46-46145

To order additional items, contact the dealer, distributor or call Metrologic's

Customer Service Department at 1-800-ID-METRO (1-800-436-3876).