10
INSTALLATION
UNPACKING THE UNIT
1. Make sure the shipping box is top-side up before opening.
2. Remove the accessories box and check its content for the
following items.
• Product Manuals
• Power Supply
• Communication Cable(s)
3. Lift the scanner out of the shipping box by gripping the
bottom of the unit on both sides.
Important! Do not lift the unit out of the box by gripping
the sides of the platter.
4. Carefully remove the shipping foam around the unit.
Important! Do not turn the unit upside down or tilt the
unit onto its side while removing the shipping
foam. The platter is not attached to the unit
and can fall off!
5. Lift the platter off the unit and store it in a safe location
until the unit has been installed in the checkout counter.
Proper Lifting Technique
On every StratosE model there are two lifting handles
locatedunder the removable platter. These handles
are provided to assist in installation when placing the
unit in the checkout counter cutout.
Figure 15. Lifting Handles Figure 14. Rotate Handles Up
Figure 10.
Figure 11.
Figure 12.
Figure 13.