Metrologic Instruments MS2122 , INTRODUCTION ,

INTRODUCTION

Design Specifications

Operational

Light Source: VLD 650 nm

Peak Laser Power: <2.2 mW

Horizontal Depth of Field: 0 mm - 152 mm (0”- 6”) for 0.33 mm (13 mil) bar code

Vertical Depth of Field: 0 mm - 216 mm (0”- 8.5”) for 0.33 mm (13 mil) bar code

Scan Speed: 6000 scans lines per second

No. of Scan Lines: 68 (40 horizontal / 28 vertical)

Motor Speed: 4800 / 6000 RPM

Min Bar Width: 0.152 mm (6.0 mil)

Decode Capability: All standard 1-D bar codes RSS-14, RSS-Expanded, and RSS-14 Limited

System Interfaces: RS232, Aux RS232, IBM468x/469x, USB (low speed and full speed), OCIA

Print Contrast: 35% minimum reflectance difference

No. Characters Read: up to 80 data characters (Maximum number will vary based on symbology and density)

Beeper Operation: 7 tones or no beep; 3 volume settings

Indicators (LED): Blue = laser on, ready to scan; White = good read, decoding

Mechanical

Length: MS2122 - 400 mm (15.75")

Width (below counter): MS2122 - 292 mm (11.5")

Depth (below counter): 100 mm (3.9")

Height (above counter): 181 mm (7.1")

Weight (with platter): MS2122 - 6.93 Kg (15.25 lbs.)

Electrical

Voltage Supply: 1.5A @ +5V / 1.5A @ +12V

Operating Power: 14.25 Watts

Standby Power: 3.25 Watts

Operating Current: 1A @ 5V / .75A @ 12V

Standby Current: .44A @ 5V / .08A @ 12V

DC Transformers: Class II; 5VDC @ 1.5A; 12 VDC @ 1.5A

For Regulatory Compliance Information refer to pages 43 - 45.

Environmental

Operating Temperature: 0°C to 40°C (32°F to 104°F)

IP Rating: IP 55

Storage Temperature: -40°C to 60°C (-40°F to 140°F)

Humidity: 5% to 95% relative humidity, non-condensing

Contaminants: Sealed to resist airborne particulate contaminants

Ventilation: None required

Specifications subject to change without notice.