39
SCANNER OPERATION
BEEPER OPTIONS AND BUTTON FUNCTIONS

Changing the Beeper Tone

Beeper tones may be configured incrementally using the following bar code. The new tone will be heard followed by a short
pause. Two more new tones will be heard signifying the new setting has been stored in memory. The silent (no beep) tone is
also selectable.
³999975
Next Beep Tone
Changing the Beeper Volume
Volume levels may be configured using the volume button or incrementally using the following bar code. The new volume will
be heard followed by a short pause. Two more tones will be heard signifying the new setting has been saved in memory. The
silent (no volume) tone is also selectable.
³999974
Next Volume

The Multi-Function Button

Figure 31. The Multi-Function Button
Changing the Beeper Volume
A short (<3 second) depression and the beeper volume will change. The new
volume will be heard. The silent (no beep) volume is also selectable.
Placing the Unit in Laser & Motor Off Power Save Mode
Long (>3 seconds) depression
The Laser & Motor Off Power Save Mode is the only power save mode that can be
activated with the multi-function button.*

* This feature is configuration dependant. Refer to the MetroSelect Configuration Guide
(MLPN 00-02407x) under Scanner Operation: Power Save Modes to enable this feature.

Waking the Unit from All Power Save Modes
The next button depression will awaken the scanner for normal operation.
Figure 32. Changing the Beeper Volume
Figure 33. Laser & Motor Off
Power Save Move
Figure 34. Normal Operation