DISCONNECTING THE POWERLINK CABLE FROM THE SCANNER

Before removing the cable from the scanner, Metrologic recommends that the power on the host system is off and the power supply has been disconnected from the PowerLink cable.

o& p

q

n

1.Locate the small ‘pin-hole’ on the back of the scanner.

2.Bend an ordinary paperclip into the shape shown above.

3.Insert the paperclip (or other small metallic pin) into the small ‘pin-hole’.

4.You will here a faint ‘click’. Pull gently on the strain-relief of the PowerLink cable and it will slide out of the scanner.

7